OUR PRODUCTS RANGE  
 

» Industrial Pulverisers
» Bulk Material Handling Equip.
» Process Equipment
» Projects/Systems
 
 
 
PULVERISERS RANGE  
 

» Hammer Mills
» Micro Pulverisers
» Pin Mills
» Universal Mills
» Turbo Classifier Mills
» Whirlpul Micronizer
» Air Swept Mills
» Disc Mills
 
 


» SALIENT FEATURES:-
  • For solid liquid separation.
  • 8 standard models /basketdia 300 mm to 1500 mm.
  • Offered in various material of construction.
  • Bag lifting & Basket lifting also offered.


===== ====== ============ ======== ======= ===
Demonstration Facility Available....
===== ====== ============ ======== ======= ===
 
» BRIEF DESCRIPTION :-
 


The ULTRAFINE unit consists essentially of an assembly of multi- chambered rotor units interpolated with circular discs and mounted on a shaft which rotates insides a casing lined with alloy steel liner Plates. A lower and upper fan cause an air current to circulate through the annular space between the rotor and stator, the quantity of which is regulated by means of air slides.

The material to be pulverised is fed into the base of the Ultrafine unit, and is introduced in an intensely turbulent and upward moving air current until it reaches the upper section of the unit.

A re-Cycling duct ensures that any insufficiently ground material can be re-introduced into the lower section. The complete installation also includes a cyclone for the collection of finely ground material and a Dust collector.

 
 
 
» WORKING PRINCIPLE :-
 
The distinctive principle of ULTRAFINE equipment consists of introducing the material to be pulverised into an air current and thereafter submitting it to :

(a) intense Turbulence :
(b) Changes of pressure :
(c) Vibration :

Which progressively disintegrate the material or cause it to shatter from within (as in the case of cellular matter).

These conditions arise at the periphery of the multi-chambered rotor, which has to be traversed by the air current carrying the material.

The ULTRAFINE GRINDER is based on the principle of circulating the product to be ground within an air system. The product is progressively micronised at the periphery of the rotors under the effect of blades shock, lining relief and attrition.

  
 
 
» PRINCIPAL APPLICATIONS :-
 

(a)  Plastic Materials and synthetic resins (vinyl).
(b)  Heat sensitive chemical products, elastomers.
(c) Non-metallic minerals (clay, limestone and dolomite, graphite, coal, diatomaceous       earths, mica,      Sulpher, etc ...).
(d)  All chemical compounds in a solid state (metallic salts, organics, catalytic materials etc ...).
(e) Pigments and Dyestuffs.
(f)  Insecticides (HCH & DDT with their carriers).
(g) Gums.
(h) Cereals and other milling products.
(i)  Animal feeding stuffs and other vegetable products.

MODEL
H.P.
ROTOR DIA.
(M.M.)
CAPACITY
PER HR.
REMARKS
PUF -350
5-15
350
10 Kg
Capacity based on
GUAR (grains) FOR
appx. 150 mesh.
PUF -500
25-50
500
30 Kg
PUF -750
75-100
750
90 Kg
PUF -1000
120-150
1000
200 Kg
Actual trial can be conducted in our demonstration room.
PUF -1100
150-180
1100
300 Kg

Note:-

(1) The Capacity Depends on; Size; Dryness; Grindability; and Required Product Fineness of Material Fed.

(2) Drive Horse Power given is Recommended for each model. Actual Horsepower consumed will depend on Duty Condition.

(3) Specification and design are subject to change without notice for any additional improvement.


 
 
 
 


Home | Profile | Our Group | Demonstration facility | Quality Control | Contact | Inquiry
Site Developed By : Vinayak InfoSoft